Model NO.:Wire terminal | Type:Wire Terminal |
Material:Stainless steel | Application:Auto Harness Terminal |
Character:Environmental Protection | Species:Wire harness |
Production Process:Cold Pressing | Certification:UL |
Plating:Gold | Process:Stamping and Punching |
Min Pitch:0.4mm | OEM/ODM:as Drawing or Sample |
Dimension Tolerance:+/-0.003mm | Material Thickness:0.05-2.0mm |
Stamping Speed:1000spm/Min | Stamping Experience:More Than 30 Years |
Trademark:FCE | Specification:RoHS; ISO9001; ISO14001; TS16949 |
Origin:Dongguan, Guangdong, China |
Stamping Process Technology Capability:
A: The min. pitch 0.4mm
B: Highest stamping speed 1000SPM/min
C: Precision could be ±0.003mm
D: Rate of hole diameter and thickness 0.85:1
E: Stamping material thickness could be 0.05-2.0mm
F: Zero loss of material use.
OEM Service
Stamping Equipment | Four Post High Speed Hydraulic Punch Presses | Maximum Press Bed Width: 500mm |
Maximum Press Feed: 100mm | Maximum Press Speed: 1000 SPM | |
Maximum Press Bed Length: 1800mm | Part Tolerance: 0.003 mm | |
Press Stroke: Adjustable from 0.5 to 2 in | Press Ratings: 30 to 160 tons | |
Stock Width Maximum: 7.5 in | Stock Thickness Capabilities: 0.05 to 2.0 mm | |
Production Method | High-speed Punch Press | Progressive Die |
Precision Die | ||
Production Capabilities | Terminal | Shield |
Bulk | Reel to Reel | |
Spring | Battery | |
Volume Capabilities | Large Run | Long Run |
Large Scale Production | Mass Volume Parts | |
Short Run | High Volume | |
Stamping Product | Connectors | Metal Stamping Parts |
Terminals | Pins | |
Shields | Lead Frames | |
Hardware | Medical Components | |
In Die Stamping Features | Countersunk | Numbering |
Chamfer | Piercing | |
Embossed | Riveting | |
Flat | Tapped | |
Forming | Tapping | |
Threaded | ||
Additional Services Provided | Assembly | Packaging |
Deburring | Rivet | |
Design | Selective Plating | |
Heat Treating | Stress Relieving | |
Plating | Samples |
Product Description